dmesg - Intel Atom E3930
------
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 16.0.6 ( llvmorg-16.0.6-0-g7cbf1a259152)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) Processor E3930 @ 1.30GHz (1286.40-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9
Features=0xbfebfbff
Features2=0x4ff8ebb7
AMD Features=0x2c100800
AMD Features2=0x101
Structured Extended Features=0x2294e283
Structured Extended Features3=0x2c000000
XSAVE Features=0xf
IA32_ARCH_CAPS=0x19
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3920068608 (3738 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table:
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ioapic0 irqs 0-119
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
smbios0: at iomem 0xf05e0-0xf05fe
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0:
acpi0:
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: on acpi0
attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Event timer "HPET5" frequency 19200000 Hz quality 440
Event timer "HPET6" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: port 0x408-0x40b on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
vgapci0: port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 19 at device 2.0 on pci0
vgapci0: Boot video device
pci0: at device 15.0 (no driver attached)
pci0: at device 15.1 (no driver attached)
pci0: at device 15.2 (no driver attached)
ahci0: port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91410000-0x91411fff,0x91416000-0x914160ff,0x91415000-0x914157ff irq 19 at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: at channel 0 on ahci0
ahcich1: at channel 1 on ahci0
pcib1: irq 22 at device 19.0 on pci0
pci1: on pcib1
igb0: port 0xe000-0xe01f mem 0x91300000-0x9131ffff,0x91320000-0x91323fff irq 22 at device 0.0 on pci1
igb0: NVM V0.6 imgtype2
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: 7c:5a:1c:d8:73:3f
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: irq 23 at device 19.1 on pci0
pci2: on pcib2
igb1: port 0xd000-0xd01f mem 0x91200000-0x9121ffff,0x91220000-0x91223fff irq 23 at device 0.0 on pci2
igb1: NVM V0.6 imgtype2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: 7c:5a:1c:d8:73:3c
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: irq 20 at device 19.2 on pci0
pci3: on pcib3
igb2: port 0xc000-0xc01f mem 0x91100000-0x9111ffff,0x91120000-0x91123fff irq 20 at device 0.0 on pci3
igb2: NVM V0.6 imgtype2
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
igb2: Ethernet address: 7c:5a:1c:d8:73:3d
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: irq 21 at device 19.3 on pci0
pci4: on pcib4
igb3: port 0xb000-0xb01f mem 0x91000000-0x9101ffff,0x91020000-0x91023fff irq 22 at device 0.0 on pci4
igb3: NVM V0.6 imgtype2
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
igb3: Ethernet address: 7c:5a:1c:d8:73:3e
igb3: netmap queues/slots: TX 2/1024, RX 2/1024
xhci0: mem 0x91400000-0x9140ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: at device 26.0 (no driver attached)
isab0: at device 31.0 on pci0
isa0: on isab0
acpi_button0: on acpi0
acpi_tz0: on acpi0
ns8250: UART FCR is broken
ns8250: UART FCR is broken
uart0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ns8250: UART FCR is broken
uart0: console (115200,n,8,1)
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 202800000d00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 202800000d00
device_attach: est1 attach returned 6
Timecounter "TSC" frequency 1286400423 Hz quality 1000
Timecounters tick every 1.000 msec
random: unblocking device.
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: ACS-2 ATA SATA 3.x device
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 61057MB (125045424 512 byte sectors)
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
ugen0.1: at usbus0
uhub0 on usbus0
uhub0: on usbus0
uhub0: 15 ports with 15 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device vendor 0x13fe USB DISK Pro (0x13fe:0x3d23)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device vendor 0x13fe USB DISK Pro (0x13fe:0x3d23)
ugen0.2: at usbus0
umass0 on uhub0
umass0: on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:2:0: Attached to scbus2
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: < USB DISK Pro PMAP> Removable Direct Access SCSI device
da0: 40.000MB/s transfers
da0: 15262MB (31257216 512 byte sectors)
da0: quirks=0x3
ichsmb0: port 0xf040-0xf05f mem 0x91412000-0x914120ff at device 31.1 on pci0
pcib0: no PRT entry for 0.31.INTA
ichsmb0: can't get IRQ
device_attach: ichsmb0 attach returned 6
lo0: link state changed to UP
igb1: link state changed to UP
igb0: link state changed to UP
igb0: link state changed to DOWN
igb0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 done
All buffers synced.
Uptime: 6m16s
------
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 16.0.6 ( llvmorg-16.0.6-0-g7cbf1a259152)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) Processor E3930 @ 1.30GHz (1286.40-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9
Features=0xbfebfbff
Features2=0x4ff8ebb7
AMD Features=0x2c100800
AMD Features2=0x101
Structured Extended Features=0x2294e283
Structured Extended Features3=0x2c000000
XSAVE Features=0xf
IA32_ARCH_CAPS=0x19
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3920064512 (3738 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table:
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ioapic0 irqs 0-119
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
smbios0: at iomem 0xf05e0-0xf05fe
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0:
acpi0:
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: on acpi0
attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Event timer "HPET5" frequency 19200000 Hz quality 440
Event timer "HPET6" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: port 0x408-0x40b on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
vgapci0: port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 19 at device 2.0 on pci0
vgapci0: Boot video device
pci0: at device 15.0 (no driver attached)
pci0: at device 15.1 (no driver attached)
pci0: at device 15.2 (no driver attached)
ahci0: port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91410000-0x91411fff,0x91416000-0x914160ff,0x91415000-0x914157ff irq 19 at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: at channel 0 on ahci0
ahcich1: at channel 1 on ahci0
pcib1: irq 22 at device 19.0 on pci0
pci1: on pcib1
igb0: port 0xe000-0xe01f mem 0x91300000-0x9131ffff,0x91320000-0x91323fff irq 22 at device 0.0 on pci1
igb0: NVM V0.6 imgtype2
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: 7c:5a:1c:d8:73:3f
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: irq 23 at device 19.1 on pci0
pci2: on pcib2
igb1: port 0xd000-0xd01f mem 0x91200000-0x9121ffff,0x91220000-0x91223fff irq 23 at device 0.0 on pci2
igb1: NVM V0.6 imgtype2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: 7c:5a:1c:d8:73:3c
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: irq 20 at device 19.2 on pci0
pci3: on pcib3
igb2: port 0xc000-0xc01f mem 0x91100000-0x9111ffff,0x91120000-0x91123fff irq 20 at device 0.0 on pci3
igb2: NVM V0.6 imgtype2
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
igb2: Ethernet address: 7c:5a:1c:d8:73:3d
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: irq 21 at device 19.3 on pci0
pci4: on pcib4
igb3: port 0xb000-0xb01f mem 0x91000000-0x9101ffff,0x91020000-0x91023fff irq 22 at device 0.0 on pci4
igb3: NVM V0.6 imgtype2
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
igb3: Ethernet address: 7c:5a:1c:d8:73:3e
igb3: netmap queues/slots: TX 2/1024, RX 2/1024
xhci0: mem 0x91400000-0x9140ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: at device 26.0 (no driver attached)
isab0: at device 31.0 on pci0
isa0: on isab0
acpi_button0: on acpi0
acpi_tz0: on acpi0
ns8250: UART FCR is broken
ns8250: UART FCR is broken
uart0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ns8250: UART FCR is broken
uart0: console (115200,n,8,1)
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 200000000d00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 200000000d00
device_attach: est1 attach returned 6
Timecounter "TSC" frequency 1286400513 Hz quality 1000
Timecounters tick every 1.000 msec
random: unblocking device.
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: ACS-2 ATA SATA 3.x device
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 61057MB (125045424 512 byte sectors)
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
ugen0.1: at usbus0
uhub0 on usbus0
uhub0: on usbus0
uhub0: 15 ports with 15 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device vendor 0x13fe USB DISK Pro (0x13fe:0x3d23)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device vendor 0x13fe USB DISK Pro (0x13fe:0x3d23)
ugen0.2: at usbus0
umass0 on uhub0
umass0: on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:2:0: Attached to scbus2
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: < USB DISK Pro PMAP> Removable Direct Access SCSI device
da0: 40.000MB/s transfers
da0: 15262MB (31257216 512 byte sectors)
da0: quirks=0x3
ichsmb0: port 0xf040-0xf05f mem 0x91412000-0x914120ff at device 31.1 on pci0
pcib0: no PRT entry for 0.31.INTA
ichsmb0: can't get IRQ
device_attach: ichsmb0 attach returned 6
igb0: link state changed to UP
lo0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 2 0 umass0: detached
0 done
All buffers synced.
Uptime: 2m26s
------
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023
[email protected]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 16.0.6 ( llvmorg-16.0.6-0-g7cbf1a259152)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) Processor E3930 @ 1.30GHz (1286.40-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9
Features=0xbfebfbff
Features2=0x4ff8ebb7
AMD Features=0x2c100800
AMD Features2=0x101
Structured Extended Features=0x2294e283
Structured Extended Features3=0x2c000000
XSAVE Features=0xf
IA32_ARCH_CAPS=0x19
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3920023552 (3738 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table:
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 irqs 0-119
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
smbios0: at iomem 0xf05e0-0xf05fe
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0:
acpi0:
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: on acpi0
attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Event timer "HPET5" frequency 19200000 Hz quality 440
Event timer "HPET6" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: port 0x408-0x40b on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
vgapci0: port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 19 at device 2.0 on pci0
vgapci0: Boot video device
pci0: at device 15.0 (no driver attached)
pci0: at device 15.1 (no driver attached)
pci0: at device 15.2 (no driver attached)
ahci0: port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91410000-0x91411fff,0x91416000-0x914160ff,0x91415000-0x914157ff irq 19 at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: at channel 0 on ahci0
ahcich1: at channel 1 on ahci0
pcib1: irq 22 at device 19.0 on pci0
pci1: on pcib1
igb0: port 0xe000-0xe01f mem 0x91300000-0x9131ffff,0x91320000-0x91323fff irq 22 at device 0.0 on pci1
igb0: NVM V0.6 imgtype2
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: 7c:5a:1c:d8:73:3f
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: irq 23 at device 19.1 on pci0
pci2: on pcib2
igb1: port 0xd000-0xd01f mem 0x91200000-0x9121ffff,0x91220000-0x91223fff irq 23 at device 0.0 on pci2
igb1: NVM V0.6 imgtype2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: 7c:5a:1c:d8:73:3c
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: irq 20 at device 19.2 on pci0
pci3: on pcib3
igb2: port 0xc000-0xc01f mem 0x91100000-0x9111ffff,0x91120000-0x91123fff irq 20 at device 0.0 on pci3
igb2: NVM V0.6 imgtype2
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
igb2: Ethernet address: 7c:5a:1c:d8:73:3d
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: irq 21 at device 19.3 on pci0
pci4: on pcib4
igb3: port 0xb000-0xb01f mem 0x91000000-0x9101ffff,0x91020000-0x91023fff irq 22 at device 0.0 on pci4
igb3: NVM V0.6 imgtype2
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
igb3: Ethernet address: 7c:5a:1c:d8:73:3e
igb3: netmap queues/slots: TX 2/1024, RX 2/1024
xhci0: mem 0x91400000-0x9140ffff irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: at device 26.0 (no driver attached)
isab0: at device 31.0 on pci0
isa0: on isab0
acpi_button0: on acpi0
acpi_tz0: on acpi0
ns8250: UART FCR is broken
ns8250: UART FCR is broken
uart0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ns8250: UART FCR is broken
uart0: console (115200,n,8,1)
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 200000000d00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 200000000d00
device_attach: est1 attach returned 6
Timecounter "TSC" frequency 1286400006 Hz quality 1000
Timecounters tick every 1.000 msec
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: ACS-2 ATA SATA 3.x device
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 61057MB (125045424 512 byte sectors)
Trying to mount root from ufs:/dev/ada0s1a [rw]...
ugen0.1: at usbus0
uhub0 on usbus0
uhub0: on usbus0
uhub0: 15 ports with 15 removable, self powered
ichsmb0: port 0xf040-0xf05f mem 0x91412000-0x914120ff at device 31.1 on pci0
pcib0: no PRT entry for 0.31.INTA
ichsmb0: can't get IRQ
device_attach: ichsmb0 attach returned 6
lo0: link state changed to UP
igb0: link state changed to UP